Aladin1712
New member
Hallo!
Ich hab einen Quad CPU Q6600 @2,4Ghz, 6gb ram
Hier eine Übersicht:
MotherBoard ist ein Gigabyte und da ist folgendes eingestellt:
MIT:
Robust Graphics Booster: Auto
Cpu Clock Ratio: 9x
Cpu Frequenzy(Disabled): 2,4Ghz(266x9)
Cpu Host Clock Control Disabled
Cpu Host Frequenzy: ( nwird nur bearbeitbar wenn cpu host control enable ist)
Meine Frage, kann ich einfach host control enabled stellen ind bei frequenzy mehr aufdrehen?
Lg
Ich hab einen Quad CPU Q6600 @2,4Ghz, 6gb ram
Hier eine Übersicht:
Von ner Software erstell^^Übersicht
Systemübersicht
CPU Allgemeines CPU Allgemeines
Prozessor Intel(r) Core(tm) 2 Extreme Quad-Core Stepping:G-0
Taktfrequenz 2401.6 MHz (aktuell: 2401.6 MHz)
Technologie 64+32-Bit (Intel EM64T), Multi-Core: ja, Hyperthreading: Support (4 Cores)
CPUID Werte 0006FBh (Basis Familie/Modell/Stepping: 6h/Fh/Bh, Extended F/M: 0h/0h)
CPUID Details Effektive Familie/Modell: 6h/Fh, Output EAX (F1, Bit 31-0): 00000000 00000000 00000110 11111011
L2-Cache 4096KB im CPU-Gehäuse
L3-Cache 0 KB
Mainboard Mainboard
Hersteller/Modell Standard-Mainboard
Chipsatz Intel P31/P35 Express Workstation (82P31/35 MCH + ICH9) PCI Chipset
Bus-System PCI
Speicher 6142.5 MB
BIOS Bezeichnung Award Modular BIOS v6.00PG
BIOS Versions-ID 01/04/2008-P35-ICH9-6A79OG0NC-00
Laufwerke Laufwerke
Festplatte C - Kapazität: 698.5GB (frei: 645.8GB)
DVD ROM D - Kapazität: k.A. (frei: k.A.)
DVD ROM E - Kapazität: k.A. (frei: k.A.)
Festplatte J - Kapazität: 931.5GB (frei: 546.7GB)
DVD ROM K - Kapazität: k.A. (frei: k.A.)
(S)ATA-Laufwerke (S)ATA-Laufwerke
Serial ATA-2 Festplatte SAMSUNG HD753LJ (Kapazität: 750.2 GB)
DVD-ROM TSSTcorpDVD-ROM SH-D162D (Kapazität: k.A.)
CD-ROM TSSTcorp CDDVDW SH-S203P (Kapazität: k.A.)
Grafikkarte 1 Grafikkarte 1
Beschreibung 0,NVIDIA GeForce 8800 GT
Hersteller NVIDIA
Chip Typ GeForce 8800 GT
Speicher 3310 MB
Videomodus Details 1920 x 1200, 32 Bit, Refresh Rate: 59
Monitor Name PnP-Monitor (Standard)
Monitor höchste Auflösung
Treiber Version 8.17.0012.5721
MotherBoard ist ein Gigabyte und da ist folgendes eingestellt:
MIT:
Robust Graphics Booster: Auto
Cpu Clock Ratio: 9x
Cpu Frequenzy(Disabled): 2,4Ghz(266x9)
Cpu Host Clock Control Disabled
Cpu Host Frequenzy: ( nwird nur bearbeitbar wenn cpu host control enable ist)
Meine Frage, kann ich einfach host control enabled stellen ind bei frequenzy mehr aufdrehen?
Lg